 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HA17431H Series Shunt Regulator REJ03D0679-0200 (Previous: ADE-204-070A) Rev.2.00 Jun 15, 2005 Description The HA17431H series is temperature-compensated variable shunt regulators. The main application of these products is in voltage regulators that provide a variable output voltage. The on-chip high-precision reference voltage source can provide 1% accuracy, which have a VKA max of 36 volts. Features * The reference voltage provide 2.500 V 1% at Ta = 25C * The reference voltage has a low temperature coefficient * The MPAK-5V (5 pin), MPAKV (3 pin) and UPAKV miniature packages are optimal for use on high mounting density circuit boards Block Diagram K REF 2.500 V + - A Application Circuit Example Switching power supply secondary-side error amplification circuit Vout R R1 K + - REF A HA17431H Series R2 GND Rev.2.00 Jun 15, 2005 page 1 of 6 HA17431H Series Ordering Information Item Industrial use HA17431HLTP HA17432HLTP HA17431HLP HA17431HP HA17431HUP HA17432HUP Package Code (Previous Code) PLSP0003ZB-A (MPAKV) PLSP0005ZB-A (MPAK-5V) PRSS0003DA-A (TO-92V) PLZZ0004CA-A (UPAKV) Temp. Range -20 to +85C Pin Arrangement MPAK-5V NC NC UPAKV (HA17431HUP) A UPAKV (HA17432HUP) A TO-92V Mark side REF A K REF A K K A REF MPAKV (HA17431HLTP) A MPAKV (HA17432HLTP) A REF A K REF K K REF Rev.2.00 Jun 15, 2005 page 2 of 6 HA17431H Series Absolute Maximum Ratings (Ta = 25C) Ratings HA17431HUP/ HA17431HP HA17432HUP 36 -50 to +50 -0.05 to +6 500 * 3 Item Cathode voltage Continuous cathode current Reference input current Power dissipation Operating temperature range Storage temperature Notes: 1. 2. 3. 4. Symbol VKA IK Iref PT Topr HA17431HLP 36 -50 to +50 -0.05 to +6 150 * 2 HA17431HLTP/ HA17432HLTP 36 -50 to +50 -0.05 to +6 150 * 2 Unit V mA mA mW C Notes 1 36 -50 to +50 -0.05 to +6 800 * 4 2,3,4 -20 to +85 -20 to +85 -20 to +85 -20 to +85 Tstg -55 to +150 -55 to +150 -55 to +150 -55 to +150 C Voltages are referenced to anode. Ta 25C. If Ta > 25C, derate by 1.2 mW/C. Ta 25C. If Ta > 25C, derate by 4.0 mW/C. 15 mm x 25 mm x 0.7mmt alumina ceramic board,Ta 25C. If Ta > 25C, derate by 6.4 mW/C. Electrical Characteristics (Ta = 25C, IK = 10 mA) Item Reference voltage Reference voltage temperature deviation Reference voltage temperature coefficient Reference voltage regulation Reference input current Reference current temperature deviation Minimum cathode current Off state cathode current Dynamic impedance Symbol Vref Vref(dev) Vref/Ta Vref/VKA Iref Iref(dev) Imin Ioff ZKA Min 2.475 -- -- -- -- -- -- -- -- Typ 2.500 10 30 2.0 0.6 0.5 0.06 0.001 0.2 Max 2.525 -- -- 3.7 3 -- 0.2 1.0 0.5 Unit V mV ppm/C mV/V A A mA A Test Conditions VKA = Vref VKA = Vref, Ta = -20C to +85C VKA = Vref, 0C to 50C gradient VKA = Vref to 36 V R1 = 10 k, R2 = R1 = 10 k, R2 = , Ta = -20C to +85C VKA = Vref VKA = 36 V, Vref = 0 V VKA = Vref, IK = 1 mA to 50 mA Notes 1 2 Notes: 1. Vref(dev) = Vref(max) - Vref(min) Vref(dev) -20 Ta (C) +85 2. Imin is given by the cathode current at Vref = Vref(IK=10mA) - 15 mV. Rev.2.00 Jun 15, 2005 page 3 of 6 HA17431H Series MPAK-5V (5 pin), MPAKV (3 pin) and UPAKV Marking Patterns The marking patterns shown below are used on MPAK-5V, MPAKV and UPAKV products. Note that the product code and mark pattern are different. The pattern is laser-printed. HA17431HLP NC (1) (2) HA17431HUP HA17432HUP HA17431HLTP A HA17432HLTP A NC (4) REF 4 (1) T (2) K 4 (1) V (2) (1) (2) (4) (1) (2) (4) 4 (a) G (b) (c) 3 (a) C (b) (c) 3 (a) D (b) (c) A K Band mark K (3) (4) (5) A A Band mark REF (3) (4) (5) REF A REF K K REF Notes: 1. Boxes (1) to (5) in the figures show the position of the letters or numerals, and are not actually marked on the package. 2. The letters (1) and (2) show the product specific mark pattern. Product (1) (2) HA17431HLP HA17431HUP HA17432HUP HA17431HLTP HA17432HLTP 4 4 4 3 3 G T V C D 3. The letter (3) shows the production year code (the last digit of the year) for UPAKV products. 4. The bars (a), (b) and (c) show a production year code for MPAK-5V and MPAKV products as shown below. After 2010 the code is repeated every 8 years. Year 2002 2003 2004 2005 2006 2007 2008 2009 (a) (b) (c) None None Bar None Bar None None Bar Bar Bar None None Bar None Bar Bar Bar None Bar Bar Bar None None None 5. The letter (4) shows the production month code (see table below). Production month Marked code Jan. A Feb. B Mar. C Apr. D May. E Jun. F Jul. G Aug. H Sep. J Oct. K Nov. L Dec. M 6. The letter (5) shows manufacturing code. For UPAKV products. Rev.2.00 Jun 15, 2005 page 4 of 6 HA17431H Series Package Dimensions JEITA Package Code SC-74A RENESAS Code PLSP0005ZB-A Previous Code MPAK-5 / MPAK-5V MASS[Typ.] 0.015g D A e Q c E HE L A A xM S A b LP L1 A3 e Reference Symbol Dimension in Millimeters A2 A yS A1 S e1 b b1 c A-A Section c1 I1 b2 Pattern of terminal position areas A A1 A2 A3 b b1 c c1 D E e HE L L1 LP x y b2 e1 I1 Q Min 1.0 0 1.0 0.35 0.1 2.8 1.5 2.5 0.3 0.1 0.2 Nom 1.1 0.25 0.42 0.4 0.13 0.11 2.95 1.6 0.95 2.8 Max 1.3 0.1 1.2 0.5 0.15 3.1 1.8 3.0 0.7 0.5 0.6 0.05 0.05 0.55 0.85 2.15 0.3 JEITA Package Code SC-59A RENESAS Code PLSP0003ZB-A Previous Code MPAK(T) / MPAK(T)V, MPAK / MPAKV MASS[Typ.] 0.011g D e A Q c E HE L A A xM S A b L1 A3 e LP Reference Symbol Dimension in Millimeters A2 A A1 S b b1 c b2 A-A Section e1 c1 I1 Pattern of terminal position areas A A1 A2 A3 b b1 c c1 D E e HE L L1 LP x b2 e1 I1 Q Min 1.0 0 1.0 0.35 0.1 2.7 1.35 2.2 0.35 0.15 0.25 Nom 1.1 0.25 0.42 0.4 0.13 0.11 1.5 0.95 2.8 Max 1.3 0.1 1.2 0.5 0.15 3.1 1.65 3.0 0.75 0.55 0.65 0.05 0.55 1.05 1.95 0.3 Rev.2.00 Jun 15, 2005 page 5 of 6 HA17431H Series JEITA Package Code SC-62 RENESAS Code PLZZ0004CA-A Previous Code UPAK / UPAKV MASS[Typ.] 0.050g Unit: mm 4.5 0.1 0.4 1.8 Max 1 1.5 0.1 0.44 Max (1.5) 2.5 0.1 4.25 Max 1.5 1.5 3.0 JEITA Package Code SC-43A RENESAS Code PRSS0003DA-A Previous Code TO-92(1) / TO-92(1)V 0.8 Min 0.44 Max MASS[Typ.] 0.25g (0.4) 0.53 Max 0.48 Max (2.5) (0.2) Unit: mm 4.8 0.3 3.8 0.3 2.3 Max 0.55 Max 0.7 0.60 Max 12.7 Min 5.0 0.2 0.5 Max 1.27 2.54 Rev.2.00 Jun 15, 2005 page 6 of 6 Sales Strategic Planning Div. Keep safety first in your circuit designs! Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 http://www.renesas.com (c) 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon 2.0 |
Price & Availability of HA17431H
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |